Journal Papers
sort ascending
Koushki, Mostafa., Chamani, Mohammad R., and Moghim, Mohammad.N. (2022). "Assessment of equilibrium pressure-flow scour depth by using jet flow theory." International Journal of Sediment Research, Fall 2022
Sharifian, Mahdi, Moghim, M.N., and Chamani, Mohammad Reza (2022). "Numerical simulation of waves overtopping over impermeable sloped seadikes." Ocean Engineering, Fall 2022
Farshi, F., Kabiri-Samani, A., Chamani, M.R., and Atoof, A. (2021), “Boundary Shear Stress Distribution in Curved Compound Open Channels”, Journal of Hydraulic Engineering, ASCE, Vol. 147, No. 2, pp. 04020099-1-10. February 2021
Zakerzadeh, M., Abtahi, S., Allafchian, A., and Chamani, Mohammad Reza (2021), “Effectiveness of superhydrophobic material on the hydroplaning risk of asphalt pavements”, International Journal of Pavement Engineering, Vol. 22, No. 12. Fall 2021
Nasiri-Dehsorkhi, E., Chamani, Mohammad R., and Kabiri-Samani, A.R. (2021). "Characteristics of flow around a cylindrical pier under a partially submerged bridge deck." ICE - Water Management, Vol. 174, No. 4, pp. 159-172. August 2021
Mehzad, N., Asghari, K., and Chamani, Mohammad R. (2020). “Application of Clustered-NA-ACO in three-objective optimization of Water Distribution Networks”, Urban Water Journal, DOI: 10.1080/1573062X.2020.1734633. March 2020
Fereshtehpour, M., and Chamani, Mohammad R. (2020). "Flow Characteristics of a Drop Manhole with an Internal Hanging Baffle Wall in a Storm Drainage System: Numerical and Experimental Modeling." Journal of Irrigation and Drai. Eng., 146(8): 04020022. August 2020
Amir M. Halabian, Amin Karamnasab, and Mohammad R. Chamani (2019), “A new hybrid SPH–FEM model to evaluate seismic response of TSD equipped-Structures”, Journal of Earthquake and Tsunami, Vol. 13, No. 2, pp. 1950007-1- 1950007-27. May 2019
Geranmehr, M., Asghari, K., and Chamani, M.R. (2019). “Uncertainty analysis of water distribution networks using type-2 fuzzy sets and parallel genetic algorithm”, Urban Water Journal, Vol. 16, No. 3, pp. 193-204. August 2019
Milad Latifi, Mohammad R. Chamani, Mohammad R. Jafari, Amir M. Halabian (2018), “Potential scour evaluation around piers of historical masonry arch bridges: a case study”, Proceedings of ICE: Bridge Engineering, Vol. 171, No. 1, pp. 37-48. May 2018
Zakerzadeh, M., Abtahi, S., Allafchian, A., and Chamani, M.R. (2018), “Examining the effect of different super hydrophobic nanomaterials on asphalt pavements”, Construction and Building Materials, Vol. 180, pp. 285-290. April 2018
Farshi, F., Kabiri-Samani, A., Chamani, M.R., and Atoof, A. (2018), “Evaluation of the secondary current parameter and depth-averaged velocity in curved compound open channels”, Journal of Hydraulic Engineering, ASCE, Vol. 144, No. 9, pp. 04018059-1-1 September 2018
Kabiri-Samani, A.R., Bakhshian, E., and M.R. Chamani (2017), “Flow characteristics of grid drop-type dissipators”, Flow Measurement and Instrumentation, Vol. 54, pp. 298-306. September 2017
Moeini, M., and Chamani, M.R. (2017), “New perspectives on the laminar boundary layer physics in a polarized pressure field with temperature gradient: an analytical approximation to Blasius equation”, Journal of Applied Fluid Mechanics, Vol. 10, No. 4 October 2017
Air flow simulation through the skylight in the historical house of Mosavar-al-Molki April 2016
Hodaei, S.M.R., Chamani, M.R., N., Mogheam, M.N., Mansoorzadeh, S., and Kabiri-Samani, A. (2016), “Experimental study on reflection coefficient of curved perforated plate”, Journal of Marine Science and Application, Vol. 15, No. 4, pp. 382-387. May 2016
Chamani, Mohammad R., Hosseinpour, M., Mostofinejad, D., and Esmaeilkhanian, B. (2014), "Evaluation of SCC yield stress from L-box test using the dam break model", Magazine of Concrete Research, Vol. 66, No. 4, pp. 175-185. March 2014
Hadi Lashkarbolouk, Amir M. Halabian& Mohammad R. Chamani (2014), "Simulation of concrete flow in V-funnel test and the proper range of viscosity and yieldstress for SCC', Materials and Structures, Vol. 47, No. 10, pp. 1729-1742. Summer 2014
Chamani, Mohammad R., Pourshahabi, S., and Sheikholeslam, F. (2013), “Fuzzy Genetic Algorithm Approach for Optimization of Surge Tanks”, Scientia Iranica, Transaction A, Vol. 20, No. 2, pp. 278-285. June 2013
Lashkarbolouk, H., Chamani, M.R., Halabian, A.M., and Pishehvar, A.R. (2013), “Viscosity evaluation of SCC based on flow simulation in L-box test”, Magazine of Concrete Research, 65(6), 365–376 February 2013
Kabiri-Samani, A., Farshi, F., and Chamani, M.R. (2013), “Boundary shear stress in smooth trapezoidal open channel flows”, Journal of Hydraulic Engineering, 139(2), 205–212 February 2013
Salmasi, F., Chamani, M.R., and Farsadi Zadeh, D. (2012), “Experimental study of energy dissipation over stepped gabion spillways with low heights”, Iranian Journal of Science and Technology, 36(C2), 253-264 July 2012
Amirabdollahian, M., Chamani, M.R., and Asghari, K. (2011), “Optimal design of water networks using fuzzy genetic algorithm”, Proceedings of the ICE - Water Management, 164(7), 335-346. July 2011
Nabavi, S.V., Beirami, M.K., and Chamani, M.R. (2011), “Free Overfall in Flat-Based Circular and U-Shaped Channels”, Flow Measurement and Instrumentation, Vol. 22, No. 1, pp. 17-24. January 2011
Zarrati, A.R., Chamani, M.R., Shafaie, A., and Latifi, M. (2010), “Scour countermeasures for cylindrical piers using riprap and combination of collar and riprap”, International Journal of Sediment Research, 25(3), 313-321. September 2010
Beirami, M.K., and Chamani, M.R. (2010), “Hydraulic jump in sloping channels: roller length and energy loss”, Canadian Journal of Civil Engineering, 37(4), 535-543 March 2010
Chamani, M.R., Beirami, M.K., Rajaratnam, N., and Dehghani, A.A. (2008), “Characteristics of subcritical flow over vertical drops with sloping aprons”, Iranian Journal of Science and Technology, 32(B5), 531-542. October 2008
Chamani, M.R., Rajaratnam, N., and Beirami, M.K. (2008), “Turbulent jet energy dissipation at vertical drops”, Journal of Hydraulic Engineering, 134(10), 1532-1535 October 2008
Beirami, M.K., Nabavi, S.V., and Chamani, M.R. (2006), “Free overfall in channels with different cross sections and sub-critical flow”, Iranian Journal of Science and Technology, 30(B1), 97-105 February 2006
Heidarpour, M., and Chamani, M.R. (2006), “Velocity distribution over cylindrical weirs”, Journal of Hydraulic Research, 44(5), 708-711 June 2006
Chamani, M. R., and Beirami, M. K. (2002), "Flow characteristics at drops", J. of Hydraulic Engineering, ASCE, Vol. 128, No. 8, pp. 788-791. August 2002
Chamani, M. R., and Rajaratnam, N. (1999), “Onset of skimming flow on stepped spillways”, Journal of Hydraulic Engineering, 125(9), 969-971 September 1999
Chamani, M. R., and Rajaratnam, N. (1999), “Characteristics of skimming flow over stepped spillways”, Journal of Hydraulic Engineering, 125(4), 361-368 April 1999
Rajaratnam, N., and Chamani, M. R. (1995), “Energy loss at drops”, Journal of Hydraulic Research, 33(3), 373-384 June 1995
Chamani, M. R., and Rajaratnam, N. (1994), "Jet flow on stepped spillways", J. of Hydraulic Engineering, ASCE, Vol. 120, No. 2, pp. 254-259 February 1994
sort ascending
Aarabi, M.J., Chamani, M.R., and Dehghani, A.A. (2013), “Pier scour in clear water for sediment mixtures”, Journal of Hydraulic Research, 51(1), 104-105 February 2013
Chamani, M. R. (1995), “Comparison of energy dissipation between nappe and skimming flow regimes on stepped chutes”, Journal of Hydraulic Research, 33(1), 122-125 February 1995
Conference Papers
sort ascending
LashkarBoluck, H., Chamani, M.R., Halabian, A.M., and Pishevar, A.R. (2012), “Simulation of water-clay flow in dam break with SPH method”, The 9th International Congress on Civil Engineering, Isfahan, Iran, May 8-10. February 2012
Aarabi, M.J., Chamani, M.R., Dehghani, A.A., and Asghari, K. (2012), "Numerical Simulation of Temporal Evolution of Local Scour in Bridge Pier with Nonuniform Sediment”, Advanced Materials Research, Volumes 250-253, pp. 3614-3610. May 2011
Amirabdollahian, M., Asghari, K., Chamani, M.R. (2011), “Type 2 fuzzy logic system in water network optimal design procedure”, International Conference on Information and Intelligent Computing (IPCSIT), Singapore. July 2011
Hodaie, S.M.R., Mansoorzadeh, S., Chamani, M.R., and Beheshti Maal, S.M. (2010), “Determination of a plunger type wave maker characteristics in a towing tank”, The 9th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2010), Tehran, November 2010
Chamani, M. R., Dehghani, A. A., and Beirami, M. K. (2005), “Characteristics of drops with sloping inverts”, 17th Canadian Hydrotechnical Conference, Edmonton, Canada, August 17-19, 865-870. August 2005
Chamani, M. R. (2000), “Air inception in skimming flow regime over stepped spillways”, International Workshop on Hydraulics of Stepped Spillways, Zurich, Switzerland, March 22-24, 61-67. March 2000
Chamani, M. R. (1996), “An experimental study on skimming flow over stepped spillways in the developed region”, Conference on Civil Engineering by Iranian Students in Canada, Montreal, July 19-20, pp. 27-34. July 1996

تحت نظارت وف ایرانی